• DIRT BLOCKA FLOOR MAT | FRONT

    Part Number :
    68X05

    The Bushranger® Dirt Blocka Mat is designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A 5cm high perimeter ridge to keep debris enclosed from your interior material. Underside of mat features ribs to prevent mat slippage. Generous size to suit even the largest 4×4, they can also be trimmed to suit your foot well. Available in black. 5 Year warranty.

    $27.50

    or 4 payments of $6.88 with Afterpay

  • DIRT BLOCKA FLOOR MAT | REAR

    Part Number :
    68X10

    The Bushranger® Dirt Blocka Mats designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A 5cm high perimeter ridge to keep debris enclosed from your interior material. Underside of mat features ribs to prevent mat slippage. Generous size to suit even the largest 4×4, they can also be trimmed to suit your foot well. Available in black. 5 Year warranty.

    $15.00

    or 4 payments of $3.75 with Afterpay

  • FLEXY FLARES | 35MM

    Part Number :
    13X66

    The Bushranger® Flexy Flares aids in protecting your vehicle and other vehicles from mud and stone damage. Tough rubber construction: Spring Steel in outer edge, easy to install.

    Supplied as one 3m length to fit minimum 2 wheel arches.

    $90.20

    or 4 payments of $22.55 with Afterpay

  • FLEXY FLARES | 65MM

    Part Number :
    13X68

    The Bushranger® Flexy Flair aids in protecting your vehicle and other vehicles from mud and stone damage. Tough rubber construction: Spring Steel in outer edge, easy to install.

    Supplied as one 3m length to fit minimum 2 wheel arches.

    $93.50

    or 4 payments of $23.38 with Afterpay

  • LED LIGHT BAR | 13″

    Part Number :
    NHT130VLI

    DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

    BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

    HIGH OUTPUT OSRAM LED’S genuine, high output OSRAM LED’s for unmatched performance.

    MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

    ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

    VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

    CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows

    complete customisation of the beam pattern.

    $215.00

    or 4 payments of $53.75 with Afterpay

  • LED LIGHT BAR | 17″

    RRP :$230.00

    Part Number :NHT170VLI

    DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

    BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

    HIGH OUTPUT OSRAM LED’S genuine, high output OSRAM LED’s for unmatched performance.

    MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

    ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

    VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

    CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows

    complete customisation of the beam pattern.

    $230.00

    or 4 payments of $57.50 with Afterpay

  • LED LIGHT BAR | 20.5″

    Part Number :NHT205VLI

    DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

    BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

    HIGH OUTPUT OSRAM LED’S genuine, high output OSRAM LED’s for unmatched performance.

    MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

    ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

    VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

    CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows

    complete customisation of the beam pattern.

    $275.00

    or 4 payments of $68.75 with Afterpay

  • LED LIGHT BAR | 24.5″

    Part Number :NHT245VLI

    DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

    BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

    HIGH OUTPUT OSRAM LED’S genuine, high output OSRAM LED’s for unmatched performance.

    MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

    ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

    VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

    CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows

    complete customisation of the beam pattern.

    $315.00

    or 4 payments of $78.75 with Afterpay

  • LED LIGHT BAR | 28″

    Part Number :NHT280VLI

    DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

    BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

    HIGH OUTPUT OSRAM LED’S genuine, high output OSRAM LED’s for unmatched performance.

    MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

    ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

    VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

    CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows

    complete customisation of the beam pattern.

    $355.00

    or 4 payments of $88.75 with Afterpay

  • LED LIGHT BAR | 32″

    Part Number :NHT32VLI

    DURABLE EXTERIOR UV stable polyester powder coat, polycarbonate lens and covers ensure long term durability to handle even the toughest Australian conditions.

    BUILT TOUGH Extruded, 6061 aircraft grade aluminium housing and cast alloy mounting feet offers long term strength and durability.

    HIGH OUTPUT OSRAM LED’S genuine, high output OSRAM LED’s for unmatched performance.

    MODERN ELECTRONICS DESIGN Built in Transistor switching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability for brightness control at the turn of a dial. (Wiring system sold separately)

    ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with the superior cooling design, allows for maximum output in all conditions.

    VERSATILE INSTALLATION Lightweight and a low-profile design with highly adjustable sliding mounting feet allow for diverse fitment.

    CHANGEABLE BEAM PATTERN Full set of clip on/clip off spot beam and flood beam protective covers allows

    complete customisation of the beam pattern.

    $385.00

    or 4 payments of $96.25 with Afterpay

  • LED LIGHT BAR | 43.5″

    $520.00

    or 4 payments of $130.00 with Afterpay

  • LED LIGHT BAR | 5.5″

    Part Number :NHT055VLI

    Bushranger® Night Hawk VLI Series Single Row LED Light Bars have been developed from the ground up by our team of engineers to offer a compact and low-profile design which takes performance, looks and usability to a whole new level. Featuring a brightness control function which allows complete control of the light intensity in adverse conditions, where too much light can be detrimental to clear vision.

    The 5.5” light is a great accessory light mounted to the side or rear of the vehicle for camping, working or reversing usage. Supplied with a protective diffused beam cover plus a protective flood beam cover. If you require a spot beam remove the cover entirely. A very versatile light is allowing for quick and easy customisation of the beam pattern to suit any requirement.

    We are backed by a 5-year warranty and our 40+ year history of supplying quality engineered 4×4 products to the Australian market.

    $115.00

    or 4 payments of $28.75 with Afterpay