{"title":"Oil Pressure Gauges","description":null,"products":[{"product_id":"oil-pressure-oil-temperature-52mm-gauge-with-optional-temperature-display","title":"Oil Pressure \u0026 Oil Temperature 52mm Gauge with optional temperature display","description":"Oil Pressure \u0026amp; Oil Temperature 52MM Gauge\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe REDARC 52mm single oil pressure \u0026amp; oil temperature gauge is ideal for monitoring your engines oil pressure and oil temperature.\u003cbr\u003e\u003cbr\u003eThe G52-POT gauge is supplied with one REDARC oil pressure sensor that displays from 0 to 80 PSI and a REDARC ¼ NPT thread oil temperature sensor that displays from 60 to 150 degrees Celsius.\u003cbr\u003e\u003cbr\u003eMonitoring oil pressure ensures the longevity of your vehicle and allows you to ensure that the correct pressure is maintained so that your car bearings are well lubricated. This is crucial when travelling at continuous high speeds and towing heavy loads. Low oil pressure can be an indicator of a low oil level. diluted or worn out oil. worn engine bearings. high oil temperature or a worn oil pump.\u003cbr\u003e\u003cbr\u003eOil subjected to excessive temperatures can lose its lubrication properties that keep metal parts from touching. If the oil temperature rises above the desired limit. you can reduce the load placed on the engine or transmission to reduce the temperature and prevent engine failure.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eTemperature Sensor*\u003cbr\u003e\u003cbr\u003eThe G52-POT gauge also supports one of four optional temperature sensors. You will need to purchase one of the following REDARC temperature sensors to equip the gauge with this function:\u003cbr\u003e\u003cbr\u003e    GS-UT-80: An NTC temperature sensor in a plastic housing for measuring cabin. fridge or outside temperature. Range is -20~ 80c. This sensor is supplied with a 6 metre extension cable.\u003cbr\u003e    GS-UT-120: An NTC temperature sensor in a metal copper housing with 6mm diameter mounting hole. Range is -20~ 120c. This sensor is supplied with a 6 metre extension cable.\u003cbr\u003e    GS-OWT1-4: Water or Oil temperature sender. 1\/4 NPT threaded. Designed to measure from -20~  170c. Supplied with 3 metre extension cable.\u003cbr\u003e    GS-OWT1-8: Water or Oil temperature sender. 1\/8 NPT threaded. Designed to measure from -20~  170c. Supplied with 3 metre extension cable.\u003cbr\u003e\u003cbr\u003eThe G52-POT gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1). two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-RI05).\u003cbr\u003e\u003cbr\u003eThe REDARC 24 to 12 Volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24 volt ignition and lighting supply. however only a 12 volt battery can be monitored.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eFeatures\u003cbr\u003e\u003cbr\u003e    Satin Chrome Bezel\u003cbr\u003e    13 Selectable Backlight Colours\u003cbr\u003e    Multiple programmable alert levels with amber or red backlight and audible beep\u003cbr\u003e    Display illuminates when park lights are turned on so you can check oil pressure and temperature without turning on the ignition.\u003cbr\u003e    If fitting more than one REDARC gauge. a communications link can be connected between the gauges to change the backlight colour of all at once.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eEnhanced Lighting Controller*\u003cbr\u003e\u003cbr\u003eREDARC recommends the purchase of an Enhanced Lighting Controller (GA-ELC) with this gauge. The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking.\u003cbr\u003e\u003cbr\u003eThe GA-ELC also allows you to program nighttime brightness and colour of your REDARC gauges. including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The GA-ELC is also 24 volt capable.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e* = Optional accessory. not included with standard purchase\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty :\u003c\/strong\u003e\u003cbr\u003e2 Years\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSensor(s) (Included) :\u003c\/strong\u003e\u003cbr\u003eGS-P-150. GS-OWT1-4\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSensor (Optional) :\u003c\/strong\u003e\u003cbr\u003eGS-UT-80 \/ GS-UT-120 \/ GS-OWT1-4 \/ GS-OWT1-8\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStandby Current Draw :\u003c\/strong\u003e\u003cbr\u003e30mA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput (Operating) Voltage :\u003c\/strong\u003e\u003cbr\u003e6 - 16V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeight (mm) :\u003c\/strong\u003e\u003cbr\u003e42\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight (kg) :\u003c\/strong\u003e\u003cbr\u003e0.05 ","brand":"My Store","offers":[{"title":"Default Title","offer_id":45254208553277,"sku":"G52-POT","price":415.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/6486\/7133\/products\/u9t789_0737fe57-d9c7-4726-b405-09802ad6b300.png?v=1690698234"},{"product_id":"oil-pressure-water-temperature-52mm-gauge-with-optional-temperature-display","title":"Oil Pressure \u0026 Water Temperature 52mm Gauge with optional temperature display","description":"Oil Pressure \u0026amp; Water Temperature 52MM Gauge\u003cbr\u003e\u003cbr\u003eThe REDARC 52mm single oil pressure \u0026amp; water temperature gauge is ideal for monitoring your engines oil pressure and coolant temperature.\u003cbr\u003e\u003cbr\u003eThe G52-PWT gauge is supplied with one REDARC oil pressure sensor that displays from 0 to 80 PSI and a REDARC 1\/8 NPT thread water temperature sensor that displays from 30 to 120 degrees Celsius.\u003cbr\u003e\u003cbr\u003eMonitoring oil pressure ensures the longevity of your vehicle and allows you to ensure that the correct pressure is maintained so that your car bearings are well lubricated. This is crucial when travelling at continuous high speeds and towing heavy loads. Low oil pressure can be an indicator of a low oil level. diluted or worn out oil. worn engine bearings. high oil temperature or a worn oil pump.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eTemperature Sensor*\u003cbr\u003e\u003cbr\u003eThe G52-PWT gauge also supports one of four optional temperature sensors. You will need to purchase one of the following REDARC temperature sensors to equip the gauge with this function:\u003cbr\u003e\u003cbr\u003e    GS-UT-80: An NTC temperature sensor in a plastic housing for measuring cabin. fridge or outside temperature. Range is -20~ 80c. This sensor is supplied with a 6 metre extension cable.\u003cbr\u003e    GS-UT-120: An NTC temperature sensor in a metal copper housing with 6mm diameter mounting hole. Range is -20~ 120c. This sensor is supplied with a 6 metre extension cable.\u003cbr\u003e    GS-OWT1-4: Water or Oil temperature sender. 1\/4 NPT threaded. Designed to measure from -20~  170c. Supplied with 3 metre extension cable.\u003cbr\u003e    GS-OWT1-8: Water or Oil temperature sender. 1\/8 NPT threaded. Designed to measure from -20~  170c. Supplied with 3 metre extension cable.\u003cbr\u003e\u003cbr\u003eThe G52-PWT gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1). two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-RI05).\u003cbr\u003e\u003cbr\u003eThe REDARC 24 to 12 Volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24 volt ignition and lighting supply. however only a 12 volt battery can be monitored.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e \u003cbr\u003eFeatures\u003cbr\u003e\u003cbr\u003e    Satin Chrome Bezel\u003cbr\u003e    13 Selectable Backlight Colours\u003cbr\u003e    Multiple programmable alert levels with amber or red backlight and audible beep\u003cbr\u003e    Display illuminates when park lights are turned on so you can check oil pressure and water temperature without turning on the ignition.\u003cbr\u003e    If fitting more than one REDARC gauge. a communications link can be connected between the gauges to change the backlight colour of all at once.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eEnhanced Lighting Controller*\u003cbr\u003e\u003cbr\u003eREDARC recommends the purchase of an Enhanced Lighting Controller (GA-ELC) with this gauge. The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking.\u003cbr\u003e\u003cbr\u003eThe GA-ELC also allows you to program nighttime brightness and colour of your REDARC gauges. including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The GA-ELC is also 24 volt capable.\u003cbr\u003e\u003cbr\u003e* = Optional accessory. not included with standard purchase\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty :\u003c\/strong\u003e\u003cbr\u003e2 Years\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSensor(s) (Included) :\u003c\/strong\u003e\u003cbr\u003eGS-P-150. GS-OWT1-8\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSensor (Optional) :\u003c\/strong\u003e\u003cbr\u003eGS-UT-80 \/ GS-UT-120 \/ GS-OWT1-4 \/ GS-OWT1-8\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStandby Current Draw :\u003c\/strong\u003e\u003cbr\u003e30mA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput (Operating) Voltage :\u003c\/strong\u003e\u003cbr\u003e6 - 16V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeight (mm) :\u003c\/strong\u003e\u003cbr\u003e42\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight (kg) :\u003c\/strong\u003e\u003cbr\u003e0.05 ","brand":"My Store","offers":[{"title":"Default Title","offer_id":45254209110333,"sku":"G52-PWT","price":415.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/6486\/7133\/products\/h845_5d9095de-242a-4291-9828-613c5f5a3472.png?v=1690698238"},{"product_id":"single-oil-pressure-52mm-gauge-with-optional-temperature-display","title":"Single Oil Pressure 52mm Gauge with optional temperature display","description":"Single Oil Pressure 52MM Gauge\u003cbr\u003e\u003cbr\u003eThe REDARC 52mm single oil pressure gauge is ideal for monitoring your engines oil pressure.\u003cbr\u003e\u003cbr\u003eThe G52-PT gauge is supplied with one oil pressure sensor from REDARC that displays from 0 to 130 PSI.\u003cbr\u003e\u003cbr\u003eThis gauge is designed to monitor the oil pressure of your vehicles engine. Monitoring oil pressure ensures the longevity of your vehicle and allows you to ensure that the correct pressure is maintained so that your car bearings are well lubricated. This is crucial when travelling at continuous high speeds and towing heavy loads. Low oil pressure can be an indicator of a low oil level. diluted or worn out oil. worn engine bearings. high oil temperature or a worn oil pump.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eTemperature Sensors*\u003cbr\u003e\u003cbr\u003eThe G52-PT gauge also supports one of four optional temperature sensors. You will need to purchase one of the following REDARC temperature sensors to equip the gauge with this function:\u003cbr\u003e\u003cbr\u003e    GS-UT-80: An NTC temperature sensor in a plastic housing for measuring cabin. fridge or outside temperature. Range is -20~ 80c. This sensor is supplied with a 6 metre extension cable.\u003cbr\u003e    GS-UT-120: An NTC temperature sensor in a metal copper housing with 6mm diameter mounting hole. Range is -20~ 120c. This sensor is supplied with a 6 metre extension cable.\u003cbr\u003e    GS-OWT1-4: Water or Oil temperature sender. 1\/4 NPT threaded. Designed to measure from -20~  170c. Supplied with 3 metre extension cable.\u003cbr\u003e    GS-OWT1-8: Water or Oil temperature sender. 1\/8 NPT threaded. Designed to measure from -20~  170c. Supplied with 3 metre extension cable.\u003cbr\u003e\u003cbr\u003eThe G52-PT gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1). two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-RI05).\u003cbr\u003e\u003cbr\u003eThe REDARC 24 to 12 Volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24 volt ignition and lighting supply. however only a 12 volt battery can be monitored.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eFeatures\u003cbr\u003e\u003cbr\u003e    Satin Chrome Bezel\u003cbr\u003e    13 Selectable Backlight Colours\u003cbr\u003e    Multiple programmable alert levels with amber or red backlight and audible beep\u003cbr\u003e    Display illuminates when park lights are turned on so you can check oil pressure and an additional temperature without turning on the ignition.\u003cbr\u003e    If fitting more than one REDARC gauge. a communications link can be connected between the gauges to change the backlight colour of all at once.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eEnhanced Lighting Controller*\u003cbr\u003e\u003cbr\u003eREDARC recommends the purchase of an Enhanced Lighting Controller (GA-ELC) with this gauge. The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking.\u003cbr\u003e\u003cbr\u003eThe GA-ELC also allows you to program nighttime brightness and colour of your REDARC gauges. including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The GA-ELC is also 24 volt capable.\u003cbr\u003e\u003cbr\u003e* = Optional accessory. not included with standard purchase\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarranty :\u003c\/strong\u003e\u003cbr\u003e2 Years\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSensor(s) (Included) :\u003c\/strong\u003e\u003cbr\u003eGS-P-150\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSensor (Optional) :\u003c\/strong\u003e\u003cbr\u003eGS-UT-80 \/ GS-UT-120 \/ GS-OWT1-4 \/ GS-OWT1-8\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStandby Current Draw :\u003c\/strong\u003e\u003cbr\u003e30mA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput (Operating) Voltage :\u003c\/strong\u003e\u003cbr\u003e6 - 16V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeight (mm) :\u003c\/strong\u003e\u003cbr\u003e42\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight (kg) :\u003c\/strong\u003e\u003cbr\u003e0.05 ","brand":"My Store","offers":[{"title":"Default Title","offer_id":45254209831229,"sku":"G52-PT","price":368.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/6486\/7133\/products\/h999999_5d691940-698b-42ca-80b5-4dcfdbccb052.png?v=1690698242"}],"url":"https:\/\/mytuff4x4.com.au\/collections\/oil-pressure-gauges.oembed","provider":"MyTuff4x4","version":"1.0","type":"link"}