Roadsafe Toyota Hilux N70

IFS 15mm Diff Drop Kit – Toyota Hilux / Fortuner / Prado 05-2015 & 2015-On [DDHIL] Diff drop kit for the Toyota Prado, Toyota Fortuner and other listed models. Lowering the front differential after a lift brings the CV angles back to where they should be, which is what stops boots tearing and joints wearing out...

Add to cart

Coil Strut Spacer 35mm (Pair) – Toyota Hilux 05-15 4WD / Prado 120/150 / FJ Cruiser 06-On [CSSHIL35] Spacer for the Toyota FJ Cruiser andToyota Hilux. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where required.

Add to cart

Coil Strut Spacer 25mm (Pair) – Toyota Hilux 05-15 4WD / Prado 120/150 / FJ Cruiser 06-On [CSSHIL25] Spacer for the Toyota FJ Cruiser andToyota Hilux. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where required.

Add to cart

Coil Strut Spacer 10mm (Pair) – Toyota Hilux 05-15 4WD / Prado 120/150 / FJ Cruiser 06-On [CSSHIL10] Spacer for the Toyota FJ Cruiser andToyota Hilux. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where required.

Add to cart

Camber Bolt Kit – Toyota Hilux N70 [CBK0000] Fine-tune your Toyota Hilux's wheel alignment and fitment with this Roadsafe Alignment Accessory (Part No. CBK0000). Essential for correcting camber or wheel offset after suspension modifications or when fitting aftermarket wheels. Confirm fitment specifications with your wheel/tyre shop before installation.

Add to cart

Battery Tray Fitting Kit – Toyota Hilux SR5 2005-On [BT025KITD] Battery tray for the Toyota Hilux. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Battery Tray Black – Toyota Hilux 05-15 [BT004-BLACK] Battery tray for the Toyota Hilux. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Brake Proportioning Valve Bracket – Toyota Hilux 05-On - Suitable For 300 c/e trim to desired length [BPVHIL] Brake proportioning valve bracket for the Toyota Hilux. Once the rear of a 4WD is lifted, the load sensing valve reads the ride height wrong and under-brakes the rear axle. This bracket resets it.Bolts to the factory location.

Add to cart

Bash Plate - Including Hardware – Toyota Hilux 2005-2014 - 3rd Plate [BP001-3] Steel underbody protection for the Toyota Hilux. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate - Including Hardware – Toyota Hilux 2005-2014 - 2nd Plate [BP001-2] Steel underbody protection for the Toyota Hilux. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate - Including Hardware – Toyota Hilux 2005-2014 - 1st Plate [BP001-1] Steel underbody protection for the Toyota Hilux. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Front Braided Brake Line - Individual – Hilux KUN26 [BL223B] Extended brake line for the Toyota Hilux. Once a 4WD is lifted, the factory lines are left stretched at full droop — this one is cut to the right length for the extra travel so nothing pulls tight over a...

Add to cart

Control Arm Assembly – Toyota Hilux N70 [BJ9510R+ARM] Complete control arm assembly for the Toyota Hilux. Supplied with the ball joint and bushes already pressed in, so it bolts straight on — no pressing, no separate joint to buy.Have the front end aligned after fitting.

Add to cart

Control Arm Assembly – Toyota Hilux N70 [BJ9510L+ARM] Complete control arm assembly for the Toyota Hilux. Supplied with the ball joint and bushes already pressed in, so it bolts straight on — no pressing, no separate joint to buy.Have the front end aligned after fitting.

Add to cart

Ball Joint – Toyota Hilux N70 [BJ9490] Restore precise steering and eliminate dangerous wheel play on your Toyota Hilux with this Roadsafe Ball Joints (Part No. BJ9490). Engineered to OEM or better specification, this direct-fit replacement uses high-grade steel construction and a greaseable design for extended service...

Add to cart

Control Arm Assembly – Toyota Hilux N70 (Front, RH) [BJ8813R+ARM] Complete control arm assembly for the Toyota Hilux. Supplied with the ball joint and bushes already pressed in, so it bolts straight on — no pressing, no separate joint to buy.Have the front end aligned after fitting.

Add to cart