- Additional information
- Reviews (0)
The Roadsafe Transmission Spacer Kits provide a fix to aid in controlling the driveline vibration and noise
after a lift is installed.
The Patrol transmission spacer plates fit neatly between the transmission plate and the chassis, and works
by spacing down the driveline thus reducing driveline angle affected with the lift. The Roadsafe kit includes
4 precision cut 6mm spacer plates, and fitting hardware to suit (extended bolts). The four spacers allow you
to run either 6mm or 12mm spacers depending upon your lift.
The Ranger/BT50 centre bearing spacers are applied to the u shaped cage that holds the centre bearing
into position, and effectively lowers the cage, and centre bearing, down to take the angle out of the pinion.
The kit is supplied complete with 12 x 3.9mm spacer washers, to suit for the spacing requirement identified
(from 3.9mm to 23.7mm), depending upon your lift. All lift kits quoted for Ford Ranger/Mazda BT50 should
include a Centre Bearing Spacer Kit, because driveline vibration can be experienced even with the smallest
Tail Shaft Spacers are required on the Patrols and Landcruisers when you have a large amount of lift and the
tail shaft is in danger of separating at the slip joint. The Tail Shaft Spacer simply mounts between the tail
shaft flange and the diff flange. Kit includes longer high tensile bolts necessary for installation.
REAR LWR TRAILING ARM BUSH – FJ CRUISER / PRADO 120 + HILUX 02-ON
Tie Rod End PATROL LH OUTER
GQ-GU & 80-105 series Radius Arm to Diff – standard – 54560-01J00$62.00
SHOCK ABSORBER STONE GUARD PROTECTOR
HEAVY DUTY TOW POINT 70 SERIES LANDCRUISER – PAIR WITH SHACKLE/BRIDLE