GME TX4610 5 WATT UHF RADIO + AXIS CH300 BLACK FELXIBLE RUBBER D
Sale

GME TX4610 5 WATT UHF RADIO + AXIS CH300 BLACK FELXIBLE RUBBER D

$526.90 $479.00

Out of stock

  • Description
  • Reviews

Description

GME TX4610 5 WATT UHF RADIO + AXIS CH300 BLACK FELXIBLE RUBBER DUCKY ANTENNA
FREE SHIPPING AUSTRALIA WIDE
5 YEAR AUSTRALIAN WARRANTY

The TX4610 is ideal for the most rugged environments and is especially suited for use on ATVs, quad bikes and tractors. The TX4610 packs a lot of features into a compact chassis including a large, tri-colour backlit display, selcall and programmable channels.

The all-new IP67 microphone includes channel up/ down keys and a priority channel button making these functions a simple one-handed operation within a modern, waterproof and dustproof chassis. The TX4610 can be installed using either the supplied metal mounting bracket, or  flush mounted with the optional MK008B flush mount kit to suit the user’s individual installation requirements.

The TX4610 is proudly designed and made in Australia, ensuring the rugged, high-quality design will offer years of reliable operation in ATV and farming vehicles.

Product Details
Compact size
Ingress protection to IP67
User Selectable Priority Channel
User Selectable Open and Group Scan
User Adjustable Squelch
5 Digit Selcall with Quiet Mode
50 In-Built CTCSS Codes
10 Selcall Memories
Tricolour Backlighting
ANI (Automatic Number Identification) and Alpha Labelling for Selcall.
19 Extra User Programmable Receive Channels (403-520 MHz).
Australian Made
5 Year Warranty

In the Box:
TX4610 UHF CB Radio
IP67 Microphone (MC610)
Metal Mounting Bracket
Microphone Clip
12V DC Lead
Screw Pack

Product Specifications
GENERAL
Compliant Specification:
Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.

Frequency Range TX:
476.425-477.4125 MHz

Number of Channels:
80 UHF CB + 19 Receive only

Channel Spacing:
12.5 kHz only

Operation Mode:
Simplex Ch1 – 80 Semi Duplex Ch 1 – 8, 41 – 48

Scanning Speed:
20 channels per second

Antenna Impedance:
50 Ohms nominal

Nominal Battery Voltage:
13.8 volts DC

Operating Voltage Range:
10 – 15 volts DC

Over voltage Protection:
30 Volts DC max. At 18 Volts DC the RF power is reduced, and the words ‘Hi DC’ flash.

Over current Protection:
In-line 3A Fuse

Frequency stability:
± 2.5 PPM

Modulation:
FM

TRANSMITTER
RF Output:
5.0 watts max

Spurious Emission:
< – 26 dBm

Maximum Deviation:
< ± 2.5 kHz at + 20 dB

Transmit Frequency Response:
+ 6 dB per octave 300 Hz to 3 kHz + 1 – 3 dB

Current Consumption:
< 260 mA muted 600 mA @ max. A.F Output

RECEIVER
Intermediate Frequencies:
1st – 21.4 MHz 2nd – 450 kHz

Sensitivity:
– 123 dB m for 12 dB SINAD unweighted

Selectivity:
– 6 dB at ± 3.5 kHz, – 60 dB at ± 12.5 kHz

Inter modulation Immunity:
73 dB

Blocking Immunity:
100 dB

Spurious Response Immunity:
70 dB

Audio signal to noise:
12.5Khz

> 45 dB

Current consumption:
1.7 amps with 50 Ohm termination

Conducted Spurious Emission:
< – 57 dB m

MECHANICAL SPECIFICATIONS
Dimensions:
65 (H) x 165 (L) x 56 (D) mm

Weight:
472 grams

Storage temperature:
-10°C to +60°C

FLEXI BLACK FLEXIBLE UHF ANTENNA CH300 RUBBER DUCKY AXIS
NEWER MODEL WITH UPDATED DECIBLE GAIN FROM 3DB TO 3DB
2 YEAR WARRANTY
FREE TRACKABLE POSTAGE AUSTRALIA WIDE

This antenna can be used for universal type mountings as it is ground plane independant, ESPECIALLY WHERE THE ANTENNA MAY BE SUBJECTED TO TREES ETC BECAUSE OF IT’S FLEXIBLE DESIGN, the CH300 is Black nylon plastic type material with 4m of low loss coaxial cable. Antenna length is 350mm top to base and 4.5 db of gain. There is a fme connector pre-fitted the end of the cable so you thread the cable through a 9.5mm hole , then screw on the UHF pl259 connector also included to the end of that which is included for simpler fit with soldering or cutting required.

CONTENTS:
DUCKY ANTENNA
4 METRE CABLE
3DB ANTENNA