- Gasket Kit Provided
- Refundable Core Charge – $900
This specification targets the mid to top end power, with power delivery/top end that every big V8 should have. The G400VD Blue Wheel turbo has a higher flow high efficiency point machined billet compressor wheel, a 40% larger high flow turbine wheel, upgraded thrust bearings, 30% stronger main shaft, higher flow VNT system and a marine grade stainless vacuum boost controller replacing the aluminised mild steel actuator that is quickly deteriorated by salt that causes premature failures. Its design boost is 33psi and can be operated efficiently to 38psi.
Standard the VDJ 70 series produces 430nm of engine torque and 90-120rwkw. With a G400VD Blue Wheel turbo combined with our custom programmed electronic control module/chip, you can expect around 850nm of engine torque and 200wkw to 220rwkw. Installations with a large intercooler, 3” exhaust, GTurbo Powerpipe feed pipe, and upgraded injectors have yielded results as high as 290rwkw (typical 260wkW) and torque over 1200nm at the crankshaft. An upgraded clutch is mandatory.
Common supporting modifications include; exhaust upgrade, lift pump, upgraded air filter and induction plumbing, replacement turbo feed pipe (GTurbo Power Pipe), Stage 1 or 2 high flow injectors. Call us to discuss what is the best items to upgrade to deliver you the best result for your dollar.
– 1 Year Warranty on all products.
– Turbos are to be supplied on an exchange basis. Additional costs are required for tuning and installation.
|1VD-FTV||Design Boost||Operating Range||Low Torque (Nm)||High Torque (Nm)||Low Power (kW)||High Power (kW)|
Suitable for Toyota Landcruiser VD-G400