Roadsafe Ford Ranger PX

Transmission Spacer Kit – Mazda BT-50 & Ford Ranger Gen2 11/11-On [TSS001] Roadsafe steering and suspension component for the Ford Ranger andMazda BT-50. Built for Australian conditions and a direct replacement for the factory part.Check the part number against your vehicle before ordering.

Add to cart

Upper Inner Control Arm Bushings - Rubber (Suitable For UCA3957R) – Ford Ranger / Mazda BT-50 Gen2 [S0527R] Control arm for the Ford Ranger andMazda BT-50. Supplied as a complete assembly with the joint and bushes already fitted, so it goes straight on.Corrects camber and castor on a lifted vehicle.

Add to cart

Top Strut Mount Poly Bag – Ford Ranger / Mazda BT-50 Gen2 [S0490R-BULK] Top strut mount for the Ford Ranger andMazda BT-50. A worn mount is what you hear as a knock over speed humps, and it lets the strut move where it shouldn’t — which shows up as odd tyre wear.Replace them...

Add to cart

Rated Recovery Tow Point (Pair) – Ford Ranger PX / Mazda BT-50 Gen2 2011-17 [RPRAN02] Rated recovery point for the Ford Ranger andMazda BT-50. Bolts to the chassis rail with high-tensile hardware and gives you somewhere honest to attach a strap — a tie-down loop is not a recovery point.Engineer rated and supplied with the...

Add to cart

Front Diff Drop Kit – Ford Ranger PX1-3 incl Raptor / Mazda BT-50 Gen2 10/2011-On [DDRAN02V2] Diff drop kit for the Ford Ranger andMazda BT-50. Lowering the front differential after a lift brings the CV angles back to where they should be, which is what stops boots tearing and joints wearing out early.Bolts in using the...

Add to cart

Coil Strut Spacer 35mm (Pair) – Toyota Prado 90 Series, Holden Colorado RG, Isuzu D-Max, Ford Ranger Gen2 & Raptor [CSSP9035] Spacer for the Toyota Prado, Isuzu D-Max / Rodeo and other listed models. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where...

Add to cart

Coil Strut Spacer 10mm (Pair) – Toyota Prado 90 Series, Holden Colorado RG, Isuzu D-Max, Ford Ranger Gen2 & Raptor [CSSP9010] Spacer for the Toyota Prado, Isuzu D-Max / Rodeo and other listed models. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where...

Add to cart

Coil Strut Spacer 25mm (Pair) – Toyota Prado 90 Series, Holden Colorado RG, Isuzu D-Max, Ford Ranger Gen2 & Raptor [CSSP9025] Spacer for the Toyota Prado, Isuzu D-Max / Rodeo and other listed models. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where...

Add to cart

Slimline Battery Tray - Black – Ford Ranger PX1/2/3 [BT104-BLACK] Battery tray for the Ford Ranger. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Battery Tray Multi Fit Battery Box (Tub Mount) - Black – Ford Ranger Gen2 XL & XLS [BT025G-BLACK] Battery tray for the Ford Ranger. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Battery Tray Multi Fit Battery Box (Tub Mount) – Ford Ranger Gen2 XL & XLS [BT025G] Battery tray for the Ford Ranger. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Battery Tray Multi Fit Battery Box (Tub Mount) - Black – Ford Ranger Gen2 XLT & Wildtrak [BT025A-BLACK] Battery tray for the Ford Ranger. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Battery Tray Multi Fit Battery Box (Tub Mount) – Ford Ranger Gen2 XLT & Wildtrak [BT025A] Battery tray for the Ford Ranger. Holds a second battery solidly enough for corrugations, using the existing body mounts — no cutting or drilling.Powder coated, with the clamp and hardware included.

Add to cart

Bash Plate – Ford Ranger PX1 & PX2 Mazda BT-50 2011-5/18 (Not PX3) - 2nd Plate (Fits Diff Drop Kit Fitted) [BP036-2] Steel underbody protection for the Ford Ranger andMazda BT-50. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate - Including Hardware – Ford Ranger PX1 & PX2 Mazda BT-50 2011-5/18 (Not PX3) - 3rd Plate [BP036-3] Steel underbody protection for the Ford Ranger andMazda BT-50. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate – Ford Ranger PX1 & PX2 Mazda BT-50 2011-5/18 (Not PX3) - 1st Plate [BP036-1] Steel underbody protection for the Ford Ranger andMazda BT-50. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart