Roadsafe Mitsubishi Triton ML

Tail Shaft Spacer 13.25mm – Mitsubishi Triton ML / MN / MQ [TSSTRI] Diff drop kit for the Mitsubishi Triton. Lowering the front differential after a lift brings the CV angles back to where they should be, which is what stops boots tearing and joints wearing out early.Bolts in using the factory mounting...

Add to cart

Rear Extended Shackles (Pair) – Mitsubishi Triton ML / MN [SK405EXT] Recovery gear for the Mitsubishi Triton. Rated equipment for winching and snatch recoveries, made to the Australian standard for the job.Check the rating against your vehicle’s weight before you use it.

Add to cart

Top Strut Mount – Mitsubishi Triton ML-MQ [S0492R] Top strut mount for the Mitsubishi Triton. A worn mount is what you hear as a knock over speed humps, and it lets the strut move where it shouldn’t — which shows up as odd tyre wear.Replace them in pairs.

Add to cart

Rated Recovery Tow Point (Pair) – Mitsubishi Triton ML-MN 2005-15 [RPTRI02] Rated recovery point for the Mitsubishi Triton. Bolts to the chassis rail with high-tensile hardware and gives you somewhere honest to attach a strap — a tie-down loop is not a recovery point.Engineer rated and supplied with the correct bolts.

Add to cart

Bash Plate – Mitsubishi Triton ML-MN / Challenger 2007-2013 - 2nd Plate [BP017-2] Steel underbody protection for the Mitsubishi Triton andMitsubishi Pajero. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate – Mitsubishi Triton ML-MN / Challenger 2007-2013 - 1st Plate [BP017-1] Steel underbody protection for the Mitsubishi Triton andMitsubishi Pajero. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate – Mitsubishi Triton ML-MN / Challenger 2007-2013 - 3rd Plate [BP017-3] Steel underbody protection for the Mitsubishi Triton andMitsubishi Pajero. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plate – Mitsubishi Triton ML-MN / Challenger 2007-2013 - 4th Plate [BP017-4] Steel underbody protection for the Mitsubishi Triton andMitsubishi Pajero. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Bash Plates (2) – Mitsubishi Triton ML-MN / Challenger 2007-2013-Plates 1 & 2 [BP017-PACK] Steel underbody protection for the Mitsubishi Triton andMitsubishi Pajero. Bolts to the factory mounting points and takes the hit that would otherwise land on your sump, steering or transfer case.Supplied with the mounting hardware.

Add to cart

Upper Ball Joint Pair extended 25mm – Mitsubishi Pajero (Nm/Np) 99-On /Triton (ML/Mn) 06-On - Min 60mm Lift Req For Fitment (Does [BJ4082PAIR] Heavy duty ball joint for the Mitsubishi Triton andMitsubishi Pajero. Built stronger than the factory item, with the extended versions correcting the geometry once a lift kit has been fitted.Sold as listed — check whether you need one side or...

Add to cart

Upper Ball Joint extended 25mm – Mitsubishi Pajero (Nm/Np) 99-On /Triton (ML/Mn) 06-On [BJ4082] Heavy duty ball joint for the Mitsubishi Triton andMitsubishi Pajero. Built stronger than the factory item, with the extended versions correcting the geometry once a lift kit has been fitted.Sold as listed — check whether you need one side or...

Add to cart

Sway Bar Link – Mitsubishi Triton ML (Front, RH) [STB8960] Eliminate sway bar knock and restore body control on your Mitsubishi Triton with this Roadsafe Sway Bar Link (Part No. STB8960). A direct replacement that restores proper sway bar function — reducing body roll and improving stability in corners and...

Add to cart

Sway Bar Link – Mitsubishi Triton ML (Front, LH) [STB8959] Eliminate sway bar knock and restore body control on your Mitsubishi Triton with this Roadsafe Sway Bar Link (Part No. STB8959). A direct replacement that restores proper sway bar function — reducing body roll and improving stability in corners and...

Add to cart

Top Strut Mount Poly Bag – Mitsubishi Triton ML [S0492R-BULK] Top strut mount for the Mitsubishi Triton. A worn mount is what you hear as a knock over speed humps, and it lets the strut move where it shouldn’t — which shows up as odd tyre wear.Replace them in pairs.

Add to cart

Coil Strut Spacer 25mm (Pair) – Mitsubishi Triton ML/MN/MR & Pajero Sport [CSSTRI25] Spacer for the Mitsubishi Triton. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where required.

Add to cart

Coil Strut Spacer 10mm (Pair) – Mitsubishi Triton ML/MN/MR & Pajero Sport [CSSTRI10] Spacer for the Mitsubishi Triton. A straightforward way to pick up ride height or level out a front end that sits low against a bull bar.Machined from solid, with the hardware where required.

Add to cart